Maintenance For The Control Table Lamp - Sega Transformers Human Alliance Owner's Manual

2 Unplug the wire connector.
3 Follow the disassembly sequence according to the picture below
13-3
Maintenance for
1 Unscrew the screws(red arrow) with 2.5mm hexagonal key.
Pull out the cover gently
46
3PCS M4*25
the control table lamp
http://op.sega.jp/op_e/
wire connector
55' cover edge
long RGB lamp bar
55'billboard base plate
billboard plate modeling of The
55'left side and right side
55'billboard base plate