Planmeca ProMax User Manual page 9

3 Main parts
There is an additional height adjusting button on the underside of the
cephalostat. The cephalostat moves up or down depending on which side
the button is pressed.
NOTE
Be careful that the X-ray unit does not hit the ceiling when you press the up
button. The maximum height can be adjusted to suit offices with a low
ceiling, contact your service technician for help.
NOTE
Make sure that there is no object under the X-ray unit when you press the
down button. If something is in danger of becoming trapped, release the
button immediately to stop the movement. Clear any obstruction before
pressing the button again.
NOTE
The column movement stops automatically if the emergency stop plate at
the bottom is pressed upwards. Clear any obstruction before moving the
column again.
NOTE
When positioning seated patients (e.g. in a wheelchair) always first move the
cephalostat down before you position the patient.
User's manual Planmeca ProMax 5