Advertisement
59.
Parts
Attach 4U - Trim Detail Plates to cover seams. four Plates will
4U - Trim Detail Plates
cover seams where Facia pieces meet, attach these with 4 - 1 1/2"
(5 1/2" high) x 5
Finishing Nails per piece. One more Trim Plate will cover the seam of
Hardware
the Track Overlay, attach with 3 - 1 1/2" Finishing Nails along the top of
N1 - 1 1/2" Finishing Nails
the Plate so nails are secured to 2x4 backing.
x 20 total
Run
caulk in siding
Dab
gap at top.
caulk in siding
Requires a large
channel on both
amount.
sides of window.
60.
Parts
Locate 4V - Window Inserts. Before installing, dab caulk in siding channel
4W - Window Inserts
on both sides of window opening. This will prevent water from getting in behind
(18 1/4" x 23") x 2
window. Position window in cavity and secure with 8 - 1 1/4" Screws. Caulk gap
Hardware
between siding and window at top. This requires a large amount of caulking but is
S2 - 1 1/4" Screws
important to fill. Later, Window Trims will be installed to hide caulking. Complete
x 16 total
second Window Insert the same.
1-888-658-1658
www.outdoorlivingtoday.com
sales@outdoorlivingtoday.com
Page 36
Advertisement
