Advertisement
Advice: Use Interior Door Header
to confirm doorway opening is
66 1/2" wide at top and bottom.
23.
Attach 2E - Interior Door Header as shown above.
Align with top framing of front walls. Attach with
4 - 2 1/2" Screws.
Advice: Prior to screwing down floor
and installing rafters, take time to
confirm your walls are level, square
and plumb.
Measure diagonal at top and bottom
of walls corner-to-corner. This should
be approximately 142 1/4". More
importantly, if measurements are not
within 1/4", your walls are not square
Toll Free 1-888-658-1658
.
www.outdoorlivingtoday.com
Page 16
Parts
2E - Interior Door Header
(1 1/2" x 3" x 66 1/2") x 1
sales@outdoorlivingtoday.com
Hardware
S1 - 2 1/2" Screws
x 4 total
Advertisement
