Advertisement
24.
To complete Wall Section, attach bottom 2x3 wall plates to plywood floor with
2 - 2 1/2" Screws per wall section. Prior to securing, make sure wall panels are
aligned correctly on the floor. Refer to Step 9. Wall siding should overhang floor
while 2x3 wall plates should sit flush with floor.
3. Rafter and Roof Section
Exploded view of all parts necessary to complete the Rafter and Roof Section. Identify all parts
prior to starting.
Outside Large Roof
Plywood - 2 pcs (3F)
Front Soffits - L/R
- 2pcs (Part 3B)
Rear Soffits
- L/R - 2pcs
(Part 3D)
1-888-658-1658
Optional - Caulking seams will help
prevent moisture from entering at
seam. Caulking not included in kit.
Center Large Roof
Plywood - 1 pcs (3G)
Rear Soffit - Center
- 1pc (Part 3E)
www.outdoorlivingtoday.com
Page 17
Center Small Roof
Plywood - 1 pcs (3I)
Rafters - 9pcs
(Part 3A)
sales@outdoorlivingtoday.com
Hardware
S1 - 2 1/2" Screws
x 28 total
Outside Small Roof
Plywood - 2 pcs (3H)
Front Soffit -
Center - 1pcs
(Part 3C)
Facia Nailing
Strips - 2pcs
(Part 3J)
Advertisement
