Advertisement
54.
Attach 4Q - Front Middle Trims above doors
where front wall extenders come together above
track. Attach with 3 - 1 1/2" Finishing Nails per
piece, aligning tight underneath soffit and centered
on seam.
Front
Facia
Facia Nailing Strip
55.
Locate one 4R - Side Facia and one 4S - Front Facia and
align in front corner. Position facias underneath roof panel, doing
a dry run first before securing. Front Facia goes against rafter
ends and Side Facia goes against Facia Nailing Strip. Align so
the Front Facia caps the Side Facia. Attach Front Facia with
2 - 1 1/2" Finishing Nails per rafter end. Attach Side Facia to
the Facia Nailing Strip with 5 - 1 1/2" Finishing Nails.
1-888-658-1658
Side Facia
- Angle Cut
www.outdoorlivingtoday.com
Page 34
Parts
4Q - Front Middle Trim
(1/2" x 2 1/2" x 7 1/2") x 2
Front Facia
caps Side Facia
4R - Side Facia - Angle Cut Ends
(1/2" x 5 1/2" x 54 1/8") x 2
4S - Front & Rear Facia - L/R
(1/2" x 5 1/2" x 50 1/2") x 4
4T - Front & Rear Facia - Center
(1/2" x 5 1/2" x 45 1/2") x 2
Hardware (Steps 55 - 58)
N1 - 1 1/2" Finishing Nails x 46 total
sales@outdoorlivingtoday.com
Hardware
N1 - 1 1/2" Finishing Nails
x 6 total
Parts (Steps 55 - 58)
Advertisement
