Advertisement
Note: We recommend you drill a 1/8" pilot hole for each screw, to avoid
splitting wood. The hole depth should be equal to 3/4 the length of screw.
A.
21 3/4"
25.
Locate 3A - Rafters, 3B & 3C - Front Soffits and
3D & 3E - Rear Soffits. Lay out on level ground and
assemble as shown above in Illustrations A through C
below. Attach Soffit Boards flush to end of outside
rafters. Attach Front Soffits with 2 - 1 1/4" Screws per
rafter end. Attach Rear Soffits with 2 - 1 1/4" Screws
per rafter end.
Important: Drill pilot holes in Soffit ends to prevent
splitting. Attach double rafters as illustrated above with
3 - 2 1/2" Screws per rafter/rafter connection.
Toll Free 1-888-658-1658
C.
48"
21 3/4"
Rear Soffits
Rear
www.outdoorlivingtoday.com
B.
Screw Rear Soffits to
Rafters with 2 - 1 1/4"
Screws per rafter end.
141 1/2"
45 1/2"
20 1/2"
20 1/2"
3A - Rafters
(1 1/2" x 2 1/2" x 54") x 9
3B - Front Soffits - Sides
(1/2" x 3 1/2" x 48") x 2
3C - Front Soffit - Center
(1/2" x 3 1/2" x 45 1/2") x 1
3D - Rear Soffits - Sides
(1/2" x 3 1/2" x 48") x 2
3E - Rear Soffit - Center
(1/2" x 3 1/2" x 45 1/2") x 1
Page 18
Screw Front Soffits to
Rafters with 2 - 1 1/4"
Screws per rafter end.
Screw double
rafters together with
3 - 2 1/2" Screws.
Front Soffits
48"
21 3/4"
Parts
S1 - 2 1/2" Screws
S2 - 1 1/4" Screws
sales@outdoorlivingtoday.com
21 3/4"
Front
Hardware
x 24 total
x 18 total
Advertisement
