Advertisement
Bottom of overlay
should touch tip
of bolts.
48.
Install both 4KA - Track Overlay - Top
pieces above the aluminum tracks. Position
pieces horizontally as shown above. Attach
with 3 - 4" Screws per piece through the
pre-drilled holes.
49.
Position both of 4KB - Track Overlay - Front onto the edge of the Overlay Top so they meet at the
center. Ends of the Overlay Front will protrude 1/2" past the ends of the Overlay Top. Attach with
8 - 1 1/2" Finishing Nails per piece.
Next, attach 4KC - Track Overlay - Ends as shown above with 4 - 1 1/2" Finishing Nails per piece.
1-888-658-1658
Parts (Steps 48 - 49)
4KA - Track Overlay - Top
(1 1/2" x 3 1/2" x 66 1/2") x 2
4KB - Track Overlay - Front
(3/4" x 5 1/2" x 67") x 2
4KC - Track Overlay - Ends
(1/2" x 3 1/2" x 5 1/2") x 2
Track Overlay
End pieces.
www.outdoorlivingtoday.com
Page 31
Centered above
Aluminum Tracks.
Hardware (Steps 48 - 49)
N1 - 1 1/2" Finishing Nails
Flush
with top.
sales@outdoorlivingtoday.com
S5 - 4" Screws
x 6 total
x 24 total
Advertisement
