Advertisement
56.
Attach other Front and Side Facia to opposite corner as per Step 55.
57.
Attach 4T - Front Facia - Center to rafter ends as shown above. Small gaps may occur between the
Center and Left/Right Facia, but these will be covered by the Detail Plates in Step 59. Attach with
2 - 1 1/2" Finishing Nails per rafter end.
58.
Attach 4S & 4T - Rear Facia onto rafter ends as per Steps 56 - 57. Small gaps may occur between
the Center and Left/Right Facia, these will be covered by Facia Detail Plates in Step 59. Rear Facia will
cap the side Facia. Attach Rear Facia to rafter ends with 2 - 1 1/2" Finishing Nails per rafter end.
1-888-658-1658
www.outdoorlivingtoday.com
Page 35
Small gaps may occur.
Small gaps may occur.
Rear Facia caps
Side Facia.
sales@outdoorlivingtoday.com
Advertisement
