Advertisement
32.
Start with an Outside Large Plywood Roof Panel. Position so plywood overhangs outside Rafter
by 2". In the front, plywood will be recessed 1/8" back from rafter end. With panel positioned correctly,
attach to Rafters with 9 - 1 1/4" screws.
33.
Position a Small Outside Plywood Roof Panel tight against the previous piece. Position with same
overhang past rafter as per Step 32. Attach to rafters with 6 - 1 1/4" screws.
34.
Locate Center and remaining Outside Roof Panels. Position Center Large Panel (45 1/2" wide) on
rafters and attach as per Steps 32 - 33. Place Small Center Roof Panel (45 1/2" wide) on rafters as per
Step 33 and attach.
1-888-658-1658
Recessed 1/8"
from rafter end
www.outdoorlivingtoday.com
Page 21
2" overhang
sales@outdoorlivingtoday.com
Advertisement
