Advertisement
29.
With Rafter Section correctly aligned, secure rafters to walls using
2 - 90° Metal Brackets per side. Attach each brackets with 4 - 1 1/4" Screws.
Screw into Wall Extender framing at the front and Wall Panel top framing at
the rear. Complete both sides.
30.
With outside rafters properly secured, attach remaining interior rafters using
1 - 2 1/2" Screw per rafter end. Screw into rafters from inside of Wall Extender
framing at front of shed, and from inside of Rear Wall top framing at rear of shed,
behind Horizontal Wall Cleats.
31.
Locate all 4 different plywood
roof panel sizes required to com-
plete roof section. Begin with an
Outside Large Roof Panel in
Step 32.
Toll Free 1-888-658-1658
Outside Panels
Center Panels
50" wide
45 1/2" wide
Parts (Steps 31 - 35)
3F - Outside Large Roof Panel
(5/8" x 48" x 50") x 2
3G - Center Large Roof Panel
(5/8" x 48" x 45 1/2") x 1
Hardware (Steps 31 - 35)
S2 - 1 1/4" Screws
www.outdoorlivingtoday.com
Outside Panels
50" wide
x 45 total
Page 20
90° Metal Brackets
Hardware
Y2 - 90° Metal Bracket
x 4 total
S2 - 1 1/4" Screws
x 16 total
Hardware
S1 - 2 1/2" Screws
x 14 total
Parts (Steps 31 - 35)
3H - Outside Small Roof Panel
(5/8" x 50" x 5 3/4") x 2
3I - Center Small Roof Panel
(5/8" x 45 1/2" x 5 3/4") x 1
sales@outdoorlivingtoday.com
Advertisement
