Thermo Scientific Barnstead GenPure xCAD Plus System Quick Reference Manual

GenPure xCAD Plus Consumables
Replacement Information
Estimated
Consumable Part # Life Time *
• Purity drops below
acceptable purity level
• "Lim. val. pure w."displayed
Ultrapure
Up to
09.2005
• "Change cartridge"
Cartridge 12 months
message displayed
– cartridge usage exceeded
maximum time in system
• Dispensing water flow
is reduced
0.2 µm Up to
09.1003
Final Filter 12 months
• 09.2005 ultrapure cartridge
is replaced
• Dispensing water flow
When
is reduced
Ultrafilter 50133980 applicable –
• Replace at least every
up to 2 years
2 years
• "UV Intensity" alert
When
(units with TOC only)
UV Lamp
09.2002 applicable –
• "UV Duration" alert
up to 2 years
is displayed
• Bacteria present in water
• When 09.2005 ultrapure
Cleaning
CMX25 n/a
cartridge is replaced
Solution
• Requires reusable
cleaning cartridge
Note: The actual life time of the consumables depend on the quality of the feed water and the
amount of water used by the system.
GenPure xCAD Plus System
How You Will Know
To Change
thermoscientific.com/purewater
© 2016 Thermo Fisher Scientific Inc. All rights reserved. All trademarks are the property of
Thermo Fisher Scientific and its subsidiaries unless otherwise specified. Specifications, terms
and pricing are subject to change. Not all products are available in all countries. Please consult
your local sales representative for details.
BRWPQGGENXCAD 0416
Ultrafilter
UV Lamp
Ultrapure
Cartridge
Dispense
Button
Thermo Scientific
Barnstead GenPure xCAD Plus System
Final Filter
Quick Reference Guide
Please refer to
operation manual
for complete
instructions