Omron SYSMAC C200HW-ZW3AT2-E-V2 Operation Manual page 106

Table of Contents

Advertisement

R: Routing Table
Error Messages
92
The following tables list the error messages that are displayed on the check re-
sults screen. After confirming the check results, use "E: Edit" to correct the rout-
ing tables, then check them again.
• Local Network Table
Error message
Too many networks
The number of networks set
in the table is outside the
allowable range (0 to 16).
Data may have been
damaged.
Local netwk addr err
The network address
specified in the "Loc Netwk"
column is outside the
allowable range (1 to 127).
SIOU unit No. range
The unit number is outside
err
the allowable range (0 to
15).
Dup local netwk addr The same local network
address is specified more
than once.
Dup SIOU unit No.
The same unit number is
err
specified more than once.
• Relay Network Table
Error message
Too many networks
The number of networks set
in the table is outside the
allowable range (0 to 20).
Data may have been
damaged.
End netwk addr
The end network address is
range err
outside the allowable range
(1 to 127).
Relay netwk addr rng
The relay network address is
err
outside the allowable range
(1 to 127).
Relay node addr rng
The relay node address is
err
outside the allowable range
(1 to 126).
Dup end netwk addr
The same end network
address is specified more
than once.
Relay netwk addr err
A network address not in the
local network table is
specified as a relay network
address.
Meaning
Action to be taken
Initialize the routing tables,
then set them again.
Change the network address
to a value between 1 and
127.
Change the unit number to a
value between 0 and 15.
Change the local network
address to a unique address.
Change the unit number to a
unique number.
Meaning
Action to be taken
Initialize the routing tables,
then set them again.
Change the network address
to a value between 1 and
127.
Change the network address
to a value between 1 and
127.
Change the network address
to a value between 1 and
126.
Change the local network
address to a unique address.
Specify one of the network
addresses set in the local
network table.
Section
5-5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sysmac c200hw-zw3at2-e3g8f5-clk11-e3g8f5-clk21-e

Table of Contents