Table of Contents
Advertisement
Chapter 2
Preparations before use
Chapter 2 Preparations before use
2-1.
How to attach/detach the platform
You can attach/detach the platform of Just NAVI™ with a single action. The platform is easy to detach also for
cleaning.
<How to attach>
There are two platform fixtures (on the right and left sides) on the back of the plate. Slide them outward.
With the platform fixtures slid outward, place the platform on the main unit of the instrument. At that time,
align the lug of the platform fixture with the groove on the main unit of the instrument.
Put the platform fixture back to the original position. If the platform is not properly mounted (see the figure
below), turning it clockwise or counterclockwise may cause a failure. To prevent any load from applying to the
platform, be sure to visually check the mounting condition of the platform. After confirming that the platform is
properly mounted, start weight measurement work.
<How to detach>
You can detach the platform using the reverse procedure to the above installation.
There are two platform fixtures (on the right and left sides) on the back of the plate. Slide the platform fixtures
outward; and detach the platform while holding the positions of the fixtures.
The platform is not properly mounted
9
Advertisement
Table of Contents
