Table of Contents
Advertisement
"LO 100g" appears on the Sub-display and the CHECK sign comes on in
the lower left of the display.
Now, you can make weight measurements with the lower limit set to 100
g.
* The upper limit is automatically determined by the settings in the user
parameters #163 and #164. The upper limit is set to [Lower limit + 10
scale intervals] as the factory default.
Checkweighing function - How to set the upper limit through easy setup
[Example] To set the upper limit to 140 g when the lower limit is already set to 100 g
When the lower limit is set to 100 g in advance and the Main-display shows
0, enter '1' '4' '0' with the numeric keypad. Then press
display is blinking.
* Note that, if the blinking continues for 3 seconds, the system automatically
sets the lower limit to the entered value.
The indication on the Sub-display switches from [HI 140g] to [LO 100g].
Now, you can make weight measurements with the lower limit set to 100
g and the upper limit set to 140 g.
* If you set the lower limit to another value through easy setup, the system
updates the upper limit to a value automatically determined by the
settings in the user parameters #163 and #164.
Checkweighing function - How to register the limits set through easy setup, in a program
[Example] To register the lower limit (100 g) and the upper limit (140 g) set through easy setup, in the program
5
When the lower limit is set to 100 g and the upper limit is set to 140 g in
advance and the Main-display shows 0, press and hold down
The program number selection screen appears. Enter '5' with the
numeric keypad, and press
lower limit, upper limit, and preset tare) in the program 5.
Checkweighing function - How to register/edit the limits through regular setup
[Example] To select the program number 2, and set the allowable weight range to values between 300 g and
315 g
Before registering program data, set the user parameter #01 to 2 on the
user parameter setting screen. * For how to set a user parameter, refer to
[Section 4-3].
Turn on the power, and then press
"CHK:" appears, indicating the setting of the Checkweighing function, and
the last two digits are a program number.
* When the field shows a program number, pressing
weighing screen.
* If you display a program number for which program data is registered,
the blue lamp comes on.
Operation
Operation
to register the current settings (the
Operation
.
24
Chapter 6
How to use the Multi-functions
when the Sub-
.
returns to the
Display
Display
Display
Advertisement
Table of Contents
