Just Weighing Function; 6-1.2) Shortage Guidance Function - Yamato Just NAVI J-101W Operation Manual

6-1.1)

Just weighing function

Just weighing function - How to enable it
Set the user parameter #178 to 1.

* For how to set a user parameter, refer to [Section 4-3].
When the setting is made, restart the instrument to enable the Just weight

function.
Just weighing function - How to weigh items
[Example] To proceed with work when the allowable weight range is set to values between 300 g and 315 g
The program-calling method, weight indications (Main-display), and lamp
 lighting rule are basically the same as those of the Checkweighing function.
When no items are placed on the instrument, the Sub-display shows the
lower limit.
Place items on the instrument.
When the measured weight is lower than 300 g (lower limit), the Sub-
display shows "Underweight."

When the measured weight is higher than 315 g (upper limit), the Sub-
display shows "Overweight."
When the measured weight falls within the Allowable weight range, the blue
lamp comes on, indicating that it is an allowable weight.
6-1.2) Shortage guidance function
* To use the Shortage guidance function, you need to register the lower limit and set the unit weight.
6-1.2) Shortage guidance function - How to set it 1 (To enable the function)
Set the user parameter #178 to 2.

* For how to set a user parameter, refer to [Section 4-3].
When the setting is made, restart the instrument to enable the Just quantity

function.
Operation
Operation
Operation
26
Chapter 6 How to use the Multi-functions
 Upon underweight
 Upon overweight
 Upon allowable
(Blue lamp comes on)
Display
Display
weight
Display