Table of Contents
Advertisement
Chapter 6
How to use the Multi-functions
The data has been registered in the program number 5. You can call the
registered data even if the power is turned off.
Now, you can proceed with the work using the Ranking combination
function.
* For subtractive type ranking, remove the box from the instrument.
* Pressing
just registered.
* A combination ratio (percentage of items that can be used for packing) is
displayed in the Main-display and expressed in percentages. This
combination ratio is used only as a guide.
* The lower limit and the upper limit of one pack are automatically
calculated and alternately displayed on the Sub-display.
* To shrink the range between the upper and lower limits of one pack,
change the user parameter #168 to narrow the ranking range. However,
when the ranking range is narrowed, the above-mentioned combination
ratio gets worse and more items are determined to be outside of the
ranks. The ranking range is set to the largest (3 ) at default to reduce
the number of items outside the ranks.
If the setting fails, the system displays INF.09 and returns to the sample
weighing screen (). In such a case, the variations in the unit weight may
be too small. Select samples of various sizes if possible, and make the
setting again.
Ranking combination function - How to weigh items 1 (Pre-combination Ranking)
[Example] For a program in which the quantity of combined items is set to 3 and the number of ranks is set to
6
Press
to call the program number selection screen. With the numeric
keypad, enter '5' as the program number, and then press
the registered program is called, you can start work.
* You cannot call the settings of an unregistered program number through
this procedure.
Alternative calling method (Easy program call)
When the Main-display shows 0, enter '5' with the numeric keypad.
Then press
program data in this way.
[For additive type ranking (when the user parameter #08 is 0)]
Place items one by one. The Main-display shows the rank number for the
measured weight of the added item.
[For subtractive type ranking (when the user parameter #08 is 1)]
First, place a box containing multiple items on the instrument. Then, remove
the items one by one. The Main-display shows the rank number for the
measured weight of the removed item.
If the weight of an item is lower than the lowest rank, underbars appear in
the rank field instead of its rank number.
on the right screen enters the work mode of the program
Operation
when the indication is blinking. You can also call
. Now that
37
Combination ratio (guide)
Calculated lower limit
Alternately displayed
Calculated upper limit
Display
Advertisement
Table of Contents
