Charge The Battery; Power Adapter - Socket SocketScan 700 Series User Manual

Charging Requirements:
• Min 5.0 VDC, 1 AMP
• Max 5.5 VDC, 3 AMPs
Important: Please ensure that only rechargeable NiMH batteries are
used in this product.
Plug in the power adapter and the barcode reader will beep twice.
Prior to first use - Fully charge your barcode reader. Use a wall charger to
charge batteries for 8 hours. Please allow 8 hours uninterrupted charging for
the initial battery charge.
The barcode reader will stop charging once the battery is full (No overcharging
will occur)
• Yellow blinking light = Charging
• Green light = Fully charged
Important: Charging from a computer USB port is not reliable and not
recommended.

Charge the Battery

8

Power Adapter