Charge The Battery - Socket SOCKETSCAN 800 Series User Manual

1. Insert charging cable into an AC charging adapter
(not included - most smartphones and tablets come with AC Adapters
that look something like this.)
2. Insert Micro USB into the 800 Series USB port.
3. The 800 Series will beep twice indicating adequate power is being
supplied to the unit.
4 Hours
Note: The SocketScan comes with a pre-installed
rechargeable Lithium Ion battery, the initial full charging of the battery
can take up to 4 hours.
Power On
Press and hold down the small power button on the side until the
SocketScan beeps twice (low-high tone).

CHARGE THE BATTERY

Side LED status
• Red = Charging
• Green = Fully charged
5