Bluetooth Reconnection - Socket SocketScan 700 Series User Manual

Bluetooth ReConnection

For all Bluetooth Connection Modes.
Note: For the S730 laser barcode reader. Print the barcode to scan.
Important! After scanning this command barcode, power off and power on the
barcode reader to make sure it is configured properly.
Enable Automatic Reconnection from barcode reader (default)
Configure the barcode reader to automatically initiate a connection to the last
paired computer/device after the barcode reader is powered on.
Disable Automatic Reconnection from barcode reader
Configure the barcode reader to wait for a computer/device to initiate a
Bluetooth connection after the barcode reader is powered on.
15