Android - Socket SocketScan 700 Series User Manual

Setup - Android Basic Keyboard Mode

Android

In this mode the barcode reader functions and communicates similar to a
keyboard. Therefore, barcode reader will work with Notes, and any other
application that supports an active cursor.
1. Power on the barcode reader. Make sure the barcode reader is discoverable
(unpaired) and the blue light blinks fast.
2. Scan barcode below.
3. Settings | Bluetooth.
4. Make sure the device has Bluetooth "On" to scan for devices.
5. In the list of found devices, select S7XX [xxxxxx]. Tap Pair.
6. The barcode reader will connect to the Android device.
7. The barcode reader will beep once after it has connected.
*If you have trouble connecting or pairing with host device, turn host device's
Bluetooth off/on, and/or perform factory reset to the barcode reader (see page
25).
Now you are ready to scan barcodes!
22