Apple - Socket SocketScan 700 Series User Manual

Setup - Apple iOS Application Mode
Scan QR Code using your host device to download Socket Mobile Companion
app to pair your barcode reader.
Watch how to set up using the Socket Mobile
demonstration.
For quick set up:
Note: For the S730 laser barcode reader. Print the barcode to scan.
1. Power on the barcode reader. Make sure the barcode reader is discoverable
(unpaired). The Blue light should be blinking fast.
2. Scan barcode. The barcode reader will beep 3 times.
3. Turn on Bluetooth on the Apple device. Go to Settings > Bluetooth. A
Bluetooth devices search will begin.
4. Tap Socket S7xx[xxxxxx] in the list of other devices found. After a few
seconds the status will change to "Connected" and the barcode reader blue
LED will stop blinking and turn solid blue.
Note: The characters in brackets are the last 6 characters of the
Bluetooth Address.
iOS Application Mode
17
Companion app for