Charge The Battery - Socket SOCKETSCAN 800 Series Manual

CHARGE THE BATTERY

Charge the 800 Series
The 800 Series must be fully charge before first use. Initial charging
takes 4 hours with the USB charging cable connected to a USB charging
port.
Insert the Micro USB side of the USB Charging Cable (included) into the
800 Series port and the USB side of the Charging Cable into the USB con-
nector of a computer or AC adapter (not included). The 800 Series will
beep twice when connected to a USB Charging Port.
Power On
Press and hold down the small power button until the 800 Series beeps
(low-high tone).
4 Hours
4
Side LED
• Red = Charging
• Green = Fully charged
"Beep
Beep"