Scanner Setup; Charge The Battery - Socket CX2895-1508 Quick Start Manual

SCANNER SETUP

4
Insert the Batteries
Unlock the Battery door by us-
ing a thin coin to turn the lock
under the CHS to a horizontal
position (turn 90 degrees).
Install the batteries in their correct po-
sition as indicated by the +/- symbols.
Important: Only use NimH
Rechargeable batteries. Do
NOt use alkaline Batteries
attach the Lanyard (optional)
Detach the string loop of the
tether from the lanyard. Then
feed the string loop through the slot
in the Twist-lock and then through the
end of the loop. Pull tight so the string
loop is secure to the Twist-lock, Reat-
tach the string loop to the tether from
the Lanyard.
If desired, attach the tether to a lan-
yard or belt.

CHARGE THE BATTERY

Charge the CHS
The CHS must be fully charged be-
fore first use. Please allow 5 hours
uninterrupted charging for the
initial battery charge.
For the 7Di or 7DiRx, lift the rubber flap to
access the power connector.
• Red LED = Charging
• Green LED = fully charged
Charging from a computer USB port
is not reliable and not recommended.
Charging Cradles & Charging QX Stand
available separately.
5 Hours
5