Pairing Reset (Bluetooth Connection) - Socket SocketScan 700 Series User Manual

This procedure will put the barcode reader in discoverable mode.
If the barcode reader is paired with a device, unpair it before trying to
connect to a different device.
Step 1: Remove or forget the barcode reader from the Bluetooth list on the
host device.
Step 2: Scan Pairing Reset barcode.
(
Note: For the S730 laser barcode reader. Print the barcode to scan).
Or, follow the Pairing Reset button sequence:
1. Power on the barcode reader.
2. Press the trigger button then power button and hold both until you hear 3
beeps.
The barcode reader will unpair and automatically power off. The next time you
power on the barcode reader, it will be discoverable.
Important: Both steps above must be done to complete
the unpairing.
Pairing Reset
24