Pairing Reset (Bluetooth Connection) - Socket DURASCAN Series User Manual

This procedure will put the scanner in discoverable mode.
If the scanner is paired with a device, unpair it before trying to
connect to a different device.
Step 1: Remove or forget the scanner from the Bluetooth list on the
host device.
Step 2: Scan Pairing Reset barcode.
Or, follow the Pairing Reset button sequence:
1. Power on the scanner.
2. Press the trigger button then power button and hold both until you hear
3 beeps.
The scanner will unpair and automatically power off. The next time you
power on the scanner, it will be discoverable.
Important: Both steps above must be done to complete
the unpairing.
Watch Youtube video for demonstration.
PAIRING RESET
24