Pairing Reset (Bluetooth Connection) - Socket SocketScan 700 Series User Manual

This procedure will put the scanner in discoverable mode.
If the scanner is paired with a device, unpair it before trying to
connect to a different device.
Step 1: Remove or forget the scanner from the Bluetooth list on the
host device.
Step 2: Scan Pairing Reset barcode.
(
Note: For the S730 laser barcode scanner print the barcode to scan).
Or, follow the Pairing Reset button sequence:
1. Power on the scanner.
2. Press the trigger button then power button and hold both until
you hear 3 beeps.
The scanner will unpair and automatically power off. The next time
you power on the scanner, it will be discoverable.
Important: Both steps above must be done to complete
the unpairing.
Pairing Reset
25