Table of Contents
Advertisement
INSTALLATION
Location
CENTER LINE
Install the outboard motor at the
stern, at the center line of the boat.
50
Installation Height
TRANSOM
HEIGHT
0 – 25 mm
(0 – 1 in)
100 mm
(4 in)
BOAT TRANSOM
HEIGHT
ANTICAVITATION PLATE
The anticavitation plate of the
outboard motor should be
0 – 25 mm (0 – 1 in) below the
bottom of the boat.
The correct dimensions differ
according to the type of boat and the
configuration of the bottom of the
boat. Follow the manufacture's
recommended installation height.
• The water level must be at least
100 mm (4 in) above the
anticavitation plate, otherwise
the water pump may not receive
sufficient cooling water, and the
engine will overheat.
Advertisement
Table of Contents
