Fast Idle Lever (R1 Type)/Fast Idle Button (R2, R3 Types) - HONDA marine BF115J Owner's Manual

CONTROLS AND FEATURES
Fast Idle Lever (R1 type)/Fast Idle
Button (R2, R3 types)
The fast idle lever/fast idle button is
only needed for starting carbureted
outboard model. The BF115J/135D/
150D models use programmed fuel
injection so, this lever will not be
needed for starting.
After the engine starts and if the
outside temperature is below 5°C
(41°F), the fast idle lever/fast idle
button can be used to accelerate
engine warm up.
34
<Fast Idle Lever>
(R1 type)
REMOTE CONTROL
LEVER
NEUTRAL
MAXIMUM
FAST IDLE
LOWEST
POSITION
FAST IDLE LEVER
The fast idle lever will not move
unless the remote control lever is in
the NEUTRAL position. Conversely,
the remote control lever will not
move unless the fast idle lever is in
the lowest position.
Lower the fast idle lever to the
lowest position to decrease the fast
idle.
<Fast Idle Button>
(R2 type)
NEUTRAL
FORWARD
Pull up
REMOTE
CONTROL
LEVER
Push
FAST IDLE BUTTON
Pushing the fast idle button, turn the
remote control lever forward. Keep
turning the lever forward. The throttle
opens and the engine speed increases
after the lever passed the shift point.
Note that the gearshift mechanism
does not function when the fast idle
button is pushed once and then
released after the remote control lever
is moved.
The control lever does not operate
unless the neutral release lever is
pulled.
REVERSE
NEUTRAL
RELEASE
LEVER