Fuse; Acg Fuse; Power Harness - HONDA marine BF115J Owner's Manual

3 A Fuse
3 A FUSE
FUSE CASE LID
<Replacement>
A spare fuse is located on the reverse
side of the junction box lid.
1. Stop the engine.
2. Remove the engine cover.
3. Remove the fuse case lid.
4. Remove the old fuse.
5. Install a new fuse with "3 A".
6. Be sure to check the fuse case lid is
securely locked.
DESIGNATED FUSE:
3 A

ACG Fuse

FUSE HOLDER
SPARE FUSE (100 A)
FUSE (100 A)
Disconnect the battery cable at the
battery terminal before checking or
replacing the ACG fuse.
<Replacement>
A spare fuse is located in the fuse
holder.
1. Stop the engine.
2. Remove the engine cover.
MAINTENANCE
3. Remove the junction box lid (see
page 137).
4. Remove the old fuse by removing
two 5 mm screws.
5. Install a new fuse with "100A".
6. Reinstall the junction box lid, and
the engine cover.
7. Reconnect the battery.
DESIGNATED FUSE:
100A

Power Harness

1. Stop the engine.
2. Disconnect the battery cable and
the power harness.
3. Open the fuse cover.
4. Pull the old fuse out of the clip with
the fuse puller supplied in the fuse
box.
5. Push a new fuse (40 A) into the
clip.
6. Close the fuse cover.
139