Function Switches (D2 Type) - HONDA marine BF115J Owner's Manual

CONTROLS AND FEATURES
<Trolling Mode>
The engine speed can be adjusted
with the [-] switch and [+] switch
when in trolling mode.
If you press and hold the [+] switch
while cruising with the throttle
closed, the mode changes to trolling
mode.
Engine speed adjusting range:
-1
650 min (rpm) – 900 min
-1
(every 50 min (rpm))
To release the trolling mode, press
and hold the [+] switch.
32
FUNCTION SWITCHES
(D2 type)
-1
(rpm)
[-] SWITCH
Function switches are used for
operations in the fast idle mode,
trolling mode, one-lever mode and
station select mode.
NT (WARM)
Lights: The shift is in neutral.
Blinks: It is in the fast idle mode.
ACT
Lights: The shift and throttle
operations are possible.
Off: The shift and throttle operations
are not possible.
<Fast Idle Mode>
The fast idle mode is only needed for
starting carbureted outboard models.
The BF115J/135D/150D models use
programmed fuel injection so, this
mode will not be needed for starting.
After the engine starts and if the
[+] SWITCH
outside temperature is below
5°C (41°F), the fast idle mode can be
used to accelerate engine warm up.