Seven Segment With Latch - Mitsubishi Electric MELSEC iQ-F Series User Manual

Seven Segment with Latch

For the instructions, refer to
When SEGL instructions are used
Examples of wiring for displaying the current value of D100 on the 4-digit 7-segment display are given below.
■Example of program
SM400
SEGL D100 Y010
■Example of program wiring
• Sink wiring
The example is the wiring for the input/output of the FX5UC-32MT/D.
COM0 COM0 Y010
1
1
2
4
8
Fuse
• Source wiring
The example is the wiring for the input/output of the FX5UC-32MT/DSS.
+V0 +V0 Y010
1
1
2
4
8
Fuse
*1 Use a 7-segment display with a latch and a built-in BCD decoder.
MELSEC iQ-F FX5 Programming Manual (Instructions, Standard Functions/Function Blocks).
K1
Transistor output (sink)
Y011 Y012 Y013 Y014
2 4 8
10 3 10 2 10 1 10 0
Transistor output (source)
Y011 Y012 Y013 Y014
2 4 8
10 3 10 2 10 1 10 0
FX5UC-32MT/D
Y015 Y016 Y017
10 0 10 1 10 2 10 3
*1
FX5UC-32MT/DSS
Y015 Y016 Y017
10 0 10 1 10 2 10 3
*1
7-segment display used for sink
wiring (for transistor output)
PLC 7-segment display
+
Y Signal
COM1 -
7-segment display used for source
wiring (for transistor output)
PLC 7-segment display
+V0 +
Y Signal
-