Installation Of Cpu Module; Installation Of Extension Modules (Extension Cable Type) - Mitsubishi Electric MELSEC iQ-F Series User Manual

Installation of CPU module

Connect expansion adapters or extension modules (extension connector type) on the CPU module before mounting the
PLC in the enclosure.
For the connection method of the expansion adapters, refer to Page 47 Connecting method A - connection of an
expansion adapter.
For the connection method of the extension modules (extension connector type), refer to
- connection of an extension module (extension connector type).
1.
Push out all DIN rail mounting hooks (A in the following figure).
1
A
1
2.
Fit the upper edge of the DIN rail mounting groove (B in the following figure) onto the DIN rail.
B
3.
Lock the DIN rail mounting hooks (C in the following figure) while pressing the PLC against the DIN rail.
3
C

Installation of extension modules (extension cable type)

1.
Push out the DIN rail mounting hook (A in the right figure) of the
side
extension module (extension cable type).
2.
Fit the upper edge of the DIN rail mounting groove (B in the right
figure) onto the DIN rail.
3.
Push the product against the DIN rail.
4.
Lock the DIN rail mounting hooks while pressing the
product against the DIN rail.
5.
Connect the extension cable. For the connecting procedure of the extension cables, refer to Page 46 Connecting
Methods for CPU Module and Extension Devices.
A
Page 47 Connecting method B
Back
1
A
B
3
5.3 Procedures for Installing on and Detaching from DIN Rail
5
5 INSTALLATION
45