Mitsubishi Electric MELSEC iQ-F Series User Manual page 90

Power supply wiring example of FX5UC-32MT/DSS
Expansion
adapter
FX5UC-32MT/DSS
FX5-C32EX/DS,
FX5-C32ET/DSS
FX5-C32EX/DS,
FX5-C32ET/DSS
FX5-C32EYT/DSS
FX5-CNV-IFC
FX5-16EX/ES S/S
*1 The grounding resistance should be 100 Ω or less.
*2 Using the same power supply to each module and extension adapters is recommended. When a different power supply is used to them, turn on
the power supply at the same time with the CPU module or earlier than the CPU module. When tuning off the power, confirm the safety of the
system and turn off the CPU module at the same time. Some extension modules may not have power supply terminals.
6 WIRING
58
6.4 Power Supply Wiring
*2
*2
Class D
*1
grounding
Fuse
Power supply for loads connected
to PLC output terminals
For details of the emergency stop operation,
refer to "DESIGN PRECAUTIONS".
24 V DC
Circuit
protector
Power ON
PL
MC
MC
Emergency
stop
MC MC
24 V DC 24 V DC