Qlixbi R Connector; Couple The Cylinder; Attach The Gas Hose (Or An Accessory) - Air Liquide Qlixbi C230 User Manual

3.3. QLIXBI R CONNECTOR

The Qlixbi R connector has a built-in regulator.
3.3.1 — COUPLE THE CYLINDER
3.3.2 — ATTACH THE GAS HOSE (OR AN ACCESSORY)
11 | Qlixbi User Manual
1. Make sure your equipment is clean and in good condition (If necessary,
clean the docking port and Qlixbi R inlet connection).
2. If the cylinder is new, break the warranty seal on the cover cap.
3. Open the cover cap and check the cleanliness of the docking port
(if necessary, clean it with a clean, dry cloth).
4. Check there are no objects inside the reserve indicator that could
prevent the connection.
5. The On/Off Lever must be in the closed position. (It' s not possible to
open the lever when the Qlixbi R is not coupled).
6. Direct the Qlixbi connector to the top of the docking port and press
firmly downwards on the top of the connector. Ensure you attach the
Qlixbi connector vertically. The Qlixbi R clicks into the cylinder.
7. The Qlixbi connector rotates through 360° so you can position the
Qlixbi R in any direction.
Warning
For safety reasons, in case of incomplete coupling,
the On/Off Lever is automatically locked.
In this case, do not force on the lever.
Repeat the complete sequence:
• Make sure there is no blocking element (particles, etc)
around the docking port or in the Qlixbi inlet connection.
• Direct the Qlixbi connector to the top of the docking port
(vertical approach) and press firmly.
• If the On/Off Lever is still locked, call Energas.
• Plug the outlet of the Qlixbi R with welding hose equipped with a female
quick coupling (According to ISO7289).
• Option: Plug a compatible quick connect supplied by Energas.