Brother MFC-J3540DW Online User's Manual page 545

Level 3 Level 4
Network Reset -
[Print Reports]
[All Settings] > [Print Reports]
Level 3
XMIT Verify
Address Book
Fax Journal
User Settings
Network Configuration Print a list of your Network settings.
WLAN Report
Caller ID History
[Machine Info.]
[All Settings] > [Machine Info.]
Level 3
Serial No.
Firmware Version
Firmware Update
Firmware Auto Check -
Page Counter
[Initial Setup]
[All Settings] > [Initial Setup]
Level 3
Date & Time
Station ID
Tone/Pulse
(Available only for some
countries.)
Fax Auto Redial
Level 5
-
Descriptions
Print a Transmission Verification Report for your last transmission.
Print a list of names and numbers stored in the Address Book.
Print a list of information about your last 200 incoming and outgoing faxes.
(TX means Transmit. RX means Receive.)
Print a list of your settings.
Print the wireless LAN connection results.
Print a list of the available Caller ID information of the last 30 received faxes and
telephone calls.
Level 4 Descriptions
- Check your machine's serial number.
Main Version Check your machine's firmware version.
Security Version
- Update your machine to the latest firmware.
View firmware information on the Home screen.
- Check the total number of pages the machine has printed.
Level 4 Descriptions
Date Add the date and time on the screen and in the headings of the
faxes you send.
Time
Time Zone Set your time zone.
Fax Enter your name and fax number so it appears on each page you
fax.
Name
- Select the dialling mode.
- Set the machine to redial the last fax number if the fax did not go
through because the line was busy.
Level 6 Descriptions
network administrator before
changing this setting.
- Restore all network settings
back to the factory settings.
538