Home >
Security
>
Send or Receive an Email Securely
SSL/TLS
Send or Receive an Email Securely Using SSL/TLS
Your Brother machine supports SSL/TLS communication methods. To use an email server that is using SSL/TLS
communication, you must configure the following settings.
We recommend using Web Based Management to configure SSL/TLS.
Verify Server Certificate
Under SSL/TLS, if you choose SSL or TLS, the Verify Server Certificate check box will be selected
automatically.
•
Before you verify the server certificate, you must import the CA certificate issued by the CA that signed
the server certificate. Contact your network administrator or your Internet Service Provider (ISP) to
confirm if importing a CA certificate is necessary.
•
If you do not need to verify the server certificate, clear the Verify Server Certificate check box.
Port Number
If you select SSL, or TLS, the Port value will be changed to match the protocol. To change the port number
manually, type the port number after you select SSL/TLS settings.
You must configure your machine's communication method to match the method used by your email server. For
details about your email server settings, contact your network administrator or your ISP.
In most cases, the secured webmail services require the following settings:
SMTP
Port
Server Authentication Method
SSL/TLS
POP3
Port
SSL/TLS
IMAP4
Port
SSL/TLS
Related Information
•
Send or Receive an Email Securely
Related Topics:
•
Configure Certificates for Device Security
•
Configure Email Sending or Receiving Using Web Based Management
> Send or Receive an Email Securely Using
25
SMTP-AUTH
TLS
995
SSL
993
SSL
386