Brother MFC-J3540DW Online User's Manual page 294

Home > Network > Wireless Network Settings
Wireless Network When the SSID is Not Broadcast
Configure Your Machine for a Wireless Network When the SSID is Not
Broadcast
Before configuring your machine, we recommend writing down your wireless network settings. You will need
this information before you continue with the configuration.
1. Check and write down the current wireless network settings.
Network Name (SSID)
Authentication Method
Open System
Shared Key
WPA/WPA2-PSK/WPA3-SAE
WPA3-SAE
For example:
Network Name (SSID)
HELLO
Authentication Method
WPA2-PSK
If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother machine
supports the use of the first WEP key only.
2. Press [Settings] > [Network] > [WLAN(Wi-Fi)] > [Find Wi-Fi Network].
3. When [Enable WLAN?] appears, press [Yes].
The wireless setup wizard starts. To cancel, press [No].
4. The machine searches for your network and displays a list of available SSIDs. Press a or b to display the
[<New SSID>] option, and then press it.
5. Press [OK].
6. Enter the SSID name, and then press [OK].
For more information about how to enter text, see Related Information.
7. Press a or b to select the Authentication Method, and then press it.
8. Do one of the following:
• If you selected the [Open System] option, press either [None] or [WEP].
If you selected the [WEP] option for Encryption type, enter the WEP key, and then press [OK].
• If you selected the [Shared Key] option, enter the WEP key, and then press [OK].
• If you selected the [WPA/WPA2-PSK/WPA3-SAE] option, press either [TKIP+AES] or [AES].
Enter the WPA key, and then press [OK].
• If you selected the [WPA3-SAE] option, press [AES].
> Use the Wireless Network
Encryption Mode
NONE
WEP
WEP
TKIP (for WPA/WPA2-PSK)
AES
AES
Encryption Mode
AES
> Configure Your Machine for a
Network Key (Password)
-
Network Key (Password)
12345678
287