Home >
Network
>
Network Features
Fax) Verification Mail
> Enable Receive Notifications for TX Verification Mail
Enable Receive Notifications for TX Verification Mail
1. Press
[Settings] > [All Settings] > [Network] > [E-mail/IFAX] > [Setup Mail RX] >
[Notification].
2. Press one of the three possible settings:
Option
Receive Notification
On
Receive Notification
MDN
Receive Notification
Off
•
To send TX verification mail, the Sender must configure these settings:
-
Switch [Notification] in [Setup Mail TX] to [On].
-
Switch [Header] in [Setup Mail RX] to [All] or [Subject+From+To].
•
To receive TX verification mail, the Receiver must configure these settings:
-
Switch [Notification] in [Setup Mail RX] to [On].
3. Press
.
Related Information
•
Internet Fax (I-Fax) Verification Mail
>
Fax Using the Internet (I-Fax)
Description
When Receive Notification is On, a fixed message is sent back to the sender to
indicate successful reception and processing of the message.
These fixed messages depend on the operation requested by the sender.
Example:
SUCCESS: Received From <Mail Address>
When Receive Notification is MDN, a report to indicate successful reception and
processing is sent back to the sender if the originating station sent a request
confirmation to the MDN field.
When Receive Notification is Off, all forms of receive notification are disabled and
no message is sent back to the sender regardless of the request.
>
I-Fax Options
>
Internet Fax (I-
320