Home >
Fax
>
Telephone Services and External Devices
Remote Codes
> Change the Remote Codes
Change the Remote Codes
The preset Remote Activation Code is *51. The preset Remote Deactivation Code is #51. If you are always
disconnected when accessing your External TAD remotely, try changing the three-digit remote codes using the
numbers 0-9, *, #.
1. Press
[Settings] > [All Settings] > [Fax] > [Setup Receive] > [Remote Codes].
2. Do one of the following:
•
To change the Remote Activation Code, press [Act.Code]. Enter the new code, and then press [OK].
•
To change the Remote Deactivation Code, press [Deact.Code]. Enter the new code, and then press
[OK].
•
If you do not want to change the Codes, go to the next step.
•
To turn the Remote Codes [Off] (or [On]), press [Remote Codes]. Press [Off] (or [On]).
3. Press
.
Related Information
•
Use the Remote Codes
>
External and Extension Telephones
>
Use the
248