Brother MFC-J3540DW Online User's Manual page 296

Home > Network > Wireless Network Settings
Enterprise Wireless Network
Configure Your Machine for an Enterprise Wireless Network
Before configuring your machine, we recommend writing down your wireless network settings. You will need
this information before you continue with the configuration.
1. Check and record the current wireless network settings.
Network Name (SSID)
Authentication Method
EAP-FAST/NONE
EAP-FAST/MS-CHAPv2
EAP-FAST/GTC
PEAP/MS-CHAPv2
PEAP/GTC
EAP-TTLS/CHAP
EAP-TTLS/MS-CHAP
EAP-TTLS/MS-CHAPv2
EAP-TTLS/PAP
EAP-TLS
For example:
Network Name (SSID)
HELLO
Authentication Method
EAP-FAST/MS-CHAPv2
• If you configure your machine using EAP-TLS authentication, you must install the client certificate
issued by a CA before you start configuration. Contact your network administrator about the client
certificate. If you have installed more than one certificate, we recommend writing down the certificate
name you want to use.
• If you verify your machine using the common name of the server certificate, we recommend writing
down the common name before you start configuration. Contact your network administrator about the
common name of the server certificate.
> Use the Wireless Network
Encryption Mode
AES
TKIP
AES
TKIP
AES
TKIP
AES
TKIP
AES
TKIP
AES
TKIP
AES
TKIP
AES
TKIP
AES
TKIP
AES
TKIP
Encryption Mode
AES
> Configure Your Machine for an
User ID
User ID
Brother
Password
-
-
Password
12345678
289