Introduction; Installation Notes; How To Order Parts - Assa Abloy Corbin Russwin Access 3 Technical Manual

Introduction

Installation Notes

1. Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Yale Locks & Hardware
makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an
existing fire rated opening, or specifying and installing a new fire rated opening, please consult with a code specialist or local code
official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
2. Refer to the templates and installation instructions for complete door preparation and installation requirements.
3. Machine screws are provided for steel reinforced doors, threaded-to-the-head AB Type screws are provided for wood door applications. In
addition, sex nuts and bolts are provided for fire rated devices and are optional for non-rated devices. It is recommended that sex nuts and
bolts be used for all exit device applications. This will improve the performance and extend the life of the product.

How to Order Parts

1. In order to simplify the ordering procedure and maintain regulatory compliance, parts are only available as listed
2. To order parts, provide the appropriate quantity, part number, finish, hand (when required) and description as directed and
illustrated below.
For example, use the following configuration to order:
A) ten escutcheon assemblies (page 30) in satin chrome
B) one surface vertical rod latch cover (page 10) in bright brass
Quantity Part Number
A 10 677F01
B 1 650F64
For assistance, contact your authorized Corbin Russwin distributor, sales agency or visit our website at www.corbinrusswin.com.
Finishes
ANSI/BHMA Code
605 Bright Brass, Clear Coated
606 Satin Brass, Clear Coated
611 Bright Bronze, Clear Coated
612 Satin Bronze, Clear Coated
613 Dark Oxidized Satin Bronze, Oil Rubbed
613E Dark Oxidized Satin Bronze, Equivalent
618 Bright Nickel, Clear Coated
619 Satin Nickel Plated, Clear Coated
625 Bright Chrome Plated
626 Satin Chrome Plated
626C Satin Chromium Plated with MicroShield
629 Bright Stainless Steel
630 Satin Stainless Steel
630C Satin Stainless Steel with MicroShield
722 Black Oxidized Satin Bronze, Oil Rubbed
Finish available with MicroShield
application. Consult factory for availability.
WARNING
This product can expose you to lead
which is known to the state of California
to cause cancer and birth defects or other
reproductive harm. For more information go
to www.P65warnings.ca.gov.
Finish
626
605
Finish Description
®
®
antimicrobial coating, additional finishes by special
®
3
ED4000, ED5000 Parts Manual
Hand Description
— Escutcheon Assemblies
— Top Latch Cover