Routine Maintenance - Assa Abloy Corbin Russwin Access 3 Technical Manual

Routine Maintenance

Periodic adjustment and maintenance will substantially lengthen the life of the lockset and ensure the best
possible trouble-free operation.
Time frames in the following maintenance items are based on normal frequency of operation. For high traffic
or high abuse applications, perform suggested maintenance more frequently.
If you have questions regarding installation or adjustment, contact an authorized Corbin Russwin distributor
or local sales representative.
Lubricate Here
R
LUBRICATE CYLINDER
Lubricate (conventional) cylinder with small amount of KeyLube by Medeco
based liquid spray lubricants such as KeyLube by Medeco
R LUBRICATE MOVING PARTS
Lubricate moving parts of inside and outside chassis with a small amount of grease or other petroleum
lubricant every two years.
TIGHTEN SCREWS
R
Check lockset for secure fastening to door once a year. Tighten throughbolts as needed.
CARE FOR LEVERSET FINISH
R
Clean leverset using only a soft, damp cloth. Using lacquer thinners, caustic soaps, abrasive cleaners
or polishes could damage the coating, resulting in tarnishing.
The warranty on Corbin Russwin products becomes void if the product is modified in any way, regardless of whether the modifications causes or contributes to any alleged defect. If a
Corbin Russwin product is modified it may no longer meet industry certification and quality control standards applicable to the original product and is no longer a genuine Corbin Russwin product.
Copyright © 1999-2018, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY Access
and Egress Hardware Group, Inc. is prohibited. Patent pending and/or patent www.assaabloydss.com/patents.
UT5200 Parts Manual
Tighten
Screws
every six months. Petroleum
®
should never be mixed with dry lubricants.
®
29