Assa Abloy Corbin Russwin Access 3 Technical Manual page 146

Combinating Worksheet
Servicing Cylinders
No special key cutting equipment or service tools are
required for cutting Pyramid keys or assembling Pyramid
cylinders.
Note the following when servicing:
1. Before the plug is inserted into the shell, the blocking
plate must be in position on the under side of the plug.
2. When reinserting the plug into the shell, care must be
taken to depress the locking pin mechanism in the shell
before the follower is used.
3. Side Pin Keyway Plug Only - If the side pins fall out,
they must be inserted back into the side pin holes (in
the plug) that correspond with the side pin dimples (on
the key). Be sure to check both side of the key for dim-
ple locations; most keys will have dimples on both sides
of the key.
Pyramid cylinders are lubricated from the factory.
Cylinders should be lubricated periodically depending upon
environmental conditions. Petroleum based lubricant is
recommended.
Recommended Lubricants:
- Medeco KeyLube
- Super Lube
®
The warranty on Corbin Russwin products becomes void if the product is modified in any way, regardless of whether the modifications causes or contributes to any alleged defect. If a
Corbin Russwin product is modified it may no longer meet industry certification and quality control standards applicable to the original product and is no longer a genuine Corbin Russwin product.
Copyright © 2006-2018, Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin is
prohibited. Patent pending and/or patent www.assaabloydss.com/patents.
1. Non Side Pin Keyway Plug
Blocking
Plate
2.
6
Owner's Manual
Plug
3. Side Pin Keyway Plug
Side Pins