Assa Abloy Corbin Russwin Access 3 Technical Manual page 371

Introduction
• All fire-rated components must be used only on fire-rated exit devices. Doing otherwise would violate any type of product
labeling or listing. Any component bearing the UL mark for fire-rating cannot be supplied. (Reference items with (UL) symbol.)
• Machine screws are provided for steel reinforced doors. In addition, sex nuts and bolts provided for fire-rated devices and
wood door fasteners are provided for wood door applications. It is recommended that sex nuts and bolts be used for all exit
device applications. This will improve the performance and extend the life of the product.
• In order to simplify the ordering procedure and maintain regulatory compliance, parts are only available as listed.
• For various special applications, optional parts are shaded on parts lists and diagrams.
• Refer to the installation instructions for complete installation.
• Drawings of parts are not to scale.
How to Order Parts
To order parts, provide the appropriate quantity, part number, finish, hand (when required) and description as directed and
illustrated below.
For example, to order ten front covers for an ED8200 Series Exit Device in 689 finish, use the following configuration:
Quantity Part Number
10 385F545
How to Order Product Catalog
The ED8000 has a product catalog which can be requested from your local sales representative. Please request catalog #45075.
Finish Hand
689
For assistance from Customer Support or Technical
Product Support, contact:
Corbin Russwin Architectural Hardware
225 Episcopal Road, Berlin, CT 06037
Phone 800-543-3658 Fax 800-447-6714
3
ED8000 Owner's Manual
Description
Front Cover