Electrolynx ® Connector System - Assa Abloy Corbin Russwin Access 3 Technical Manual

ElectroLynx Connector System
®
ElectroLynx ® Connector System
For ASSA ABLOY Group Doors and Hinges with ElectroLynx ® Connector System
•
Plug 8-pin lock connector into 8-pin door
connector (4-pin door connector not used for
this application).
•
Install lock per instruction sheet provided
•
Plug 8-pin door connector into 8-pin hinge
connector (4-pin door connector not used for
this application).
Not Used
X
•
Wire hinge to power source
12 or 24VDC
Power Supply
(Recommended Securitron BPS
series)
Input
L N
120VAC GND
60HZ
120VAC L/N/G
ElectroLynx
®
As part of their promise to provide innovative, fast and effective high security solutions to their customers, ASSA ABLOY Group companies offer
ElectroLynx , a universal quick-connect system that simplifies the electrification of the door opening. ElectroLynx
®
ASSA ABLOY Inc.
Normally Closed Fire
Alarm Contact
(If Required)
12 or
24VDC
+ -
CL3300 Parts Manual
For non ElectroLynx Connector System, door
install available retrofit harness and use with
ElectroLynx hinge. Follow installation instructions
for ElectroLynx Connector System.
For non ElectroLynx Connector System door and
hinge, remove connector on lock (warranty void
if rectifier module is removed). Use proper crimp
splices or wire nuts in accordance with local code
for terminating connections. No polarity of wires
is required.
Use template T30971 for door preparation
•
Electrical Specifications
24 Volts AC/DC +/-10%
Operating Current .150 AMP
12 Volts AC/DC +/- 10%
Operating current .250 AMP
C
NC
Switch or
relay contacts
17
Pigtail harness (Supplied with
McKinney Hinge)
(2 wires with 8-pin connector)
Red (+), 2
Black (-), 1
Plug into
8-pin hinge
connector
at door
is a registered trademark of
®