Assa Abloy Corbin Russwin Access 3 Technical Manual page 10

Access 3 Pin Kits
™
PK-30-AP Pinning Kit
The PK-30-AP Kit is used to pin AP fixed and LFIC cylinders. The heavy duty steel kit prevents pins from mixing.
The kit includes:
• 100 each of bottom pins sizes 0-6
• 100 each of build up pins 1-12
• 100 each of master pins sizes 1-6
• 100 each of top pins sizes 1-10
• 100 each of bump resistant pins sizes 4-10
• 100 tumbler springs – part number 763F617
• 100 sidebar spring - part number 756F817
• 50 #2-56 screw - part number 756F847
• 25 KIK/KIL spring cover – part number 756F858
• 25 each mortise/rim, LFIC spring cover – part number 756F722
• 10 Sidebar (8500 CYL.) – part number 763F565
• Tweezer – part number 239F368
• Access 3 Key decoder – part number 756F937
PK-30-MASTER Master Pinning Kit
The PK-30-MASTER "Master Kit" includes all pins needed to re-pin AP, AS and AHS cylinders.
The kit includes:
• 100 each of AP bottom pins sizes 0-6
• 100 each of angled bottom pins sizes 1-6 (L-C-R)
• 100 each of build up pins sizes 1-12
• 100 each of master pins sizes 1-6
• 100 each of top pins sizes 1-10
• 100 each of bump resistant pins sizes 4-10
• 100 tumbler springs – part number 763F617
• 50 #2-56 screw - part number 756F847
• 25 KIK/KIL spring cover – part number 756F858
• 25 mortise/rim, lfic spring cover – part number756F722
• 10 sidebar – part number756F807
• 10 sidebar (8500 CYL.) – part number 763F565
• 100 sidebar spring – part number756F817
• 50 slider spring – part number756F797
• Tweezer – part number 239F368
• Access 3 Key decoder – part number756F937
Note: CT-4 follower (size .509) may be ordered separately.
10
Technical Manual