Sip Configuration; Introduction; Voip Features; Registration Handsets - EnGenius FreeStyl SIP User Manual

SIP Configuration

Introduction

The FreeStyl SIP is a long-range cordless telephone system with built-in LAN. It
provides users the ability to make VoIP calls based SIP protocol. Below describes
how to setup the SIP configuration of the FreeStyl SIP base from the web.

VoIP Features

- Support 4 VoIP calls.
- Each handset has only one SIP account.
- Register Up to 10 SIP accounts and 10 handsets accordingly.
- Flexible Call Manager features to dedicate either the SIP or PSTN call.
- Use G.711U-law for VoIP codec.
- SIP and LAN setting from web configuration.
- Internet interface: 10/100base-T LAN port x1

Registration Handsets

- Before setting the SIP configuration, the available handset(s) of the FreeStyl SIP
must register to the base.
- Register handset:
(1) Press and hold the register key on the base until the LED changes to white
color. The base can perform the handset registration while the LED is flashing.
(2) On handset, enter "MENU, 7, 1" to enter the registration.
(3) The assigned ID (from 10 to 19) will be displayed on handset LCD, indicating
successful registration.
(4) Repeat the above steps for all additional handsets.

Default Settings

Connect the Internet port to the FreeStyl SIP's LAN port.
DHCP:
By default, the FreeStyl SIP base unit is assigned an IP address dynamically
by the DHCP server. If somehow it can't be assigned the IP address from
the DHCP server, it will roll back to default static IP 192.168.1.156 for the
base unit automatically. User can set static IP 192.168.1.x to their PC so
that they would be able to access web of this base unit.
IP Address
Username / Password
IP by DHCP server
Or 192.168.1.156
admin / admin
~55~

Web Configuration

Open a web browser (Internet Explorer/Firefox/Safari/Chrome) and enter the IP.
The default username and password are admin. Once you have entered the correct
username and password, click the Login button to open the web-base configuration
page. If successful, you will be logging in and see the configuration of FreeStyl SIP.
LAN Configuration
When you want to change the LAN IP to Static IP setting including IP address,
subnet mask, gateway, proxy and VLAN, once you click Apply, the change will take
effect. You will now know the new IP of the FreeStyl SIP in advance of accessing the
web configuration next time.
~56~