Default Settings - EnGenius SP-935 User Manual

Repeat New Re-enter the new password in the Confirm Password entry box for
Password confirmation.
Apply / Cancel Click Apply to apply the changes or Cancel to return previous
settings.
Time
This page allows you to set the internal clock.
Time
Time Setup Select to sync with a NTP server or with the PC internal clock.
Time Zone Select a time zone from the drop-down list and check whether you
want to enter the IP address of an NTP server or use the default
NTP server to get have the internal clock set automatically.
Apply / Cancel Click Apply to apply the changes or Cancel to return previous
settings.
Diagnosis
This page allows you to analyze the connection quality of SP-935 and trace the
routing table to a target in the network.
Diagnosis
Address to Ping Enter the IP address you would like to search.
Ping Result Check the specific IP address alive
~57~
Start Click Start Ping to begin pinging target device (via IP).
Firmware
This page allows you to upgrade the firmware of SP-935.
To perform the Firmware Upgrade:
Click the Browse button and navigate the OS File System to the location of the
upgrade file.
Select the upgrade file. The name of the file will appear in the Upgrade File field.
Click the Apply button to commence the firmware upgrade.
Note: The device is unavailable during the upgrade process and must restart when
the upgrade is completed. Any connections to or through the device will be lost.
Back-up
This page allows you to save the current device configurations. When you save the
configurations, you also can reload the saved configurations into the device through
the "Restore Settings" from A File section. If extreme problems occur, or if you
have set the SP-935 wrongly, you can use the " Reset" button in the Restore to
factory default section to restore all the configurations of the SP-935 to the original

default settings.

Back-up
Restore to factory Click Reset button to restore the SP-935 to its factory default
default settings.
Backup Setting Click Save to save the current configured settings.
Restore Setting To restore settings that have been previously backed up, click
Browse, select the file, and click Upload.
Reset/ReBoot/Registration
You can press and hold the below buttons to execute specific features, or using the
web setting instead.
~58~