Basic Operations - EnGenius SP-935 User Manual

Basic Operations

Operation Modes
Both the base station and handset have levels of operation at which time only
certain procedures of functions can be performed.
A. Base Operation Modes
1. STANDBY mode- this is the default mode. The page key is active in standby
mode only. The base "Power" (blue color) LED will light up during this mode.
2. TALK mode- the base station operates in this mode during phone call. The "In
Use" (white color) LED will light up during this mode.
3. REGISTRATION mode- the base station enters this mode by pressing and
holding the REG button for 5 seconds. The 4 LEDs will be blinking in
"Registration" mode, also a prompt sound will be emitted.
B. Handset Operation Modes
1. STANDBY mode- this is the default mode.
a. If there is no on-going activity, the handset
automatically goes into SLEEP/STANDBY mode to save
battery power.
b. The handset can be turned off completely by holding
down the key for 3 seconds.
c. The standby screen display (custom name) can be
edited.
d. The 2-dight number represents the handset ID
2. MENU mode
a. Press the Right soft function key to activate Menu
mode.
b. In Menu mode, the handset settings and information
contained in memory can be changed.
c. The functions available through the Menu selection
are covered in greater detail from page 43.
d. The Menu structure display as below:
Main Menu
1.KeyGuard
SELECT BACK
~27~
3. Menu Tree
Menu 1.KeyGuard
2.PhoneBook
3.Sounds 1.Ring Volume
2.Ring Tone
3.Key Voulme
4.Key Tone
4.Call Settings 1.Dial Prefix
2.Group Setting
3.Call Manager
4.Feature Call
5.Phone Settings 1. Mic. Gain
2.Any Key Talk
3.Contrast
4.Backlight
5.Name Tag
6.Custom Name
7.Change Pwd
8.Headset Ring
Enter
6.Base Settings
Base PIN:----
7.Registration 1.Register
2.Deregister
3.Remote REG
Enter Password
8.Menu Display
----
1.PA On/Off
2.Line On/Off
Incoming 3.Int. On/Off
Outgoing 1.Auto
2.Manual
3.Off
Call Barring
1.DTMF Duration
2.Flash time:
3.Assign Next HS
4.Clear HS
5.Change PIN
6.Auto Hang Up
7.Set Time
8.Line Detection
1.Call Setting
2.Phone Setting
3.Base Setting
~28~